Geo-Flo, 2" HPDE Pipe X 2" Flange (40 GPM max.)

The industry’s only all HPDE hydraulic separator which allows the elimination of another carbon steel component in the geothermal system thereby reducing the possibility of system corrosion. The GHS Geothermal Hydraulic Separator is insulated with CFC-free, polyurethane foam insulation, and is housed in powder-coated steel cabinet. The lightweight design is intended to be wall-mounted. The GHS comes standard with a blow-down valve at the bottom, and an automatic air vent and expansion tank connection port at the top. 

Application:
The Geo-Flo Hydraulic Separator (GHS) creates a low pressure loss zone, where two independent primary and secondary circuits may be connected. The flow in one circuit does not affect the flow in the other circuit. The pressure drop of the ground loop (primary circuit) may be considered separately from the pressure drop of the inside piping and heat pump heat exchangers (secondary circuit) for smaller pump sizing. Additional benefits of a Hydraulic Separator include air and dirt separation. The low pressure loss zone (less than 2 fps) causes any dirt/debris to fall to the bottom of the tank, where it can be drained at the blow-down valve. Likewise, any air that may still be in the system collects at the top of the tank, where it can be eliminated via the automatic air vent.

NOTE: All flange connections are standard ANSI Class 150 flanges (gaskets and hardware not included). The listed flow rate is on each side of hydraulic separator, not combined flow.